Tag Archives: retraction

Updated Slic3r config file for version 0.7.0

For a while now I’ve been exclusively using Slic3r for converting .stl files to .gcode files, so I can print things on my home-built 3D printer. The current version of Slic3r is 0.7.0, and it does what I expect it … Continue reading

Posted in 3d printing, Software | Tagged , , , , | 3 Comments

Slic3r and Extruder calibration

Rich over at RichRap has just started a series of posts on using Slic3r for preparing STL files for printing, explaining the effects of the various parameters. His first article also includes some good info on calibrating your extruder output, … Continue reading

Posted in 3d printing, Software | Tagged , , , | Leave a comment

Retraction solution with Marlin, Pronterface and Slic3r

I’ve just fixed some key settings in Slic3r. Retraction Speed is now 7mm per second (down from 100!), and the Retraction Distance is 1mm. There is still slight room for improvement, but this is the best I’ve had it running … Continue reading

Posted in 3d printing, Software | Tagged , , , , , , | 29 Comments

Retraction, Huh! What is it good for?

Retraction is the technique of sucking molten plastic back up into the heated extrusion nozzle of a 3D printer. Like squeezing the edges of a toothpaste tube to suck back in some of the toothpaste you accidentally squeezed out. The … Continue reading

Posted in 3d printing, Software | Tagged , , , , , , , , , , , | 7 Comments